ATC HSK63F Plastic Tool Holder Fork Fingers for CNC Automatic Tool Changer »
This ATC plastic tool holder fork is the HSK 63F Tool Fork, also called HSK63F CNC Toolholder finger, used with HSK 63F tool holder, like ISO30 tool forks used with ISO30 tool holders, BT30 BT40 tool forks used with BT30 BT40 tool holders.
HSK63F Plastic Tool Holder Forks Specifications:
1. Made in China, famous brand,
2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion.
3. Alloy steel block casting inside, reinforced structure, has high loading capacity, also with steel positioning pins.
4. Dynamic balance grade: G2.5, 30000rpm
5. Yaw precision: 0.005mm
HSK63F ATC tool fingers with your HSK63F CNC toolholder, used with carousel drum type ATC CNC router or side loading linear auto toolchanger. These HSK 63 F plastic forks can easily found on many woodworking CNC routers centers including; Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, among others.
Maintenance: CNC tool fingers wear out over time. If the HSK spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle cone taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.
Note: Never blow compressed air into the spindle taper.
Compatibility: Can be used with all HSK 63F tool holders.
We also can supply white and black ISO30 toolforks, DIN30 forks, BT30 tool forks, BT40 tool clips, Mobidelli forks etc
Payment can be made by Western Union, Paypal, T/T.
Welcome your inquiry!
SUZHOU RICO MACHINERY CO., LTD